Recessed lighting has become the preferred lighting in today's homes and businesses for many good reasons. Their versatility allows them to be placed throughout your ceiling for unobtrusive general lighting, positioned above the sink for task lighting, or aimed toward artwork as the perfect accent lighting.
FEATURES |
COMPATIBLE HOUSINGS
FEATURES
- For insulated ceilings
- May be used as non-IC trims with same wattages
- Finish: Black, White, Brushed Nickel, Brushed Copper, Antique Bronze and Chesnut
- Lamp: 120w BR40, 150w PAR 38, 100w A19 (not included)
- Note: Recessed housing NOT INCLUDED
- Outer Diameter: 7-3/4"
Specifications
COMPATIBLE HOUSINGS
P187-TG - 6" Remodel IC and Non-IC Incandescent Housing Features:
- Retrofit version of the P87-AT
- Exclusive mounting slide bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 0.5" to 1.5" thick
- IC/Non-IC peel away label for field conversion
- UL and CUL Listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wired in end-of-run applications
- US Patent #5758959
- 6.625" Ceiling Opening
- 7.825" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P87-ATQC - 6" New Construction Quick Connect Air-Tight IC/Non-IC Incandescent Housing Features:
- Quick-connects allow simple installation of 12-20 AWG wire, without the need for wire nuts
- New Construction
- Air Tight IC and Non-IC
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket or caulking around plaster frame opening
- UL and CUL Listed for damp locations and through wiring
- Integral Romex clamp
- Tool-less can adjustment for varying ceiling thickness
- Full reflector design eliminates light leaks
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent #5758959, 5857766, 6004011
- Slotted, interlocking bar hangers securely span 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2.5" thick
- 6.875" Ceiling Opening
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P87-AT - 6" 6" New Construction Air-Tight IC/Non-IC Incandescent Housing Features:
- New Construction
- Air Tight IC and Non-IC
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket or caulking around plaster frame opening
- UL and CUL Listed for damp locations and through wiring
- Integral Romex clamp
- Tool-less can adjustment for varying ceiling thickness
- Full reflector design eliminates light leaks
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent #5758959, 5857766, 6004011
- Can be installed in ceilings from 0.5" to 2.5" thick
- Slotted, interlocking bar hangers securely span 24" T-bar spacing
- 6.875" Ceiling Opening
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P821-AT - 6" High Wattage New Construction/Air Tight IC Incandescent Housing Features:
- Allows for high wattage in insulated ceilings up to 150watts
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket
- UL and CUL Listed for damp locations and through wiring
- Socket mounts to trim for consistent lamp position
- Integral Romex clamp
- Integral nailer and T-bar mounting clamp
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent # 5758959, 5857766, 6004001
- Can be installed in ceilings from 0.5" to 2.5" thick
- Spans 24" T-bar spacing
- 6.875" dia. Ceiling Opening
- 8.375" x 13" Plaster Frame
- 7.625" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P83-26ICAT - 6" New Construction IC/Air-Tight Compact Fluorescent Housing - Energy Star Compliant Features:
- Quick-connects allow simple installation of 12-20 AWG wire, without the need for wire nuts
- 120v NPF electronic ballast
- Meets requirements for Enery Star
- Meets California T-24 requirements
- Not rated for through branch, but can be "daisy-chained"
- One 4-pin triple or spiral 26w compact fluorescent lamp vertically mounted
- Spans 24" T-bar spacing
- Can be installed in ceilings from 1/2" to 2" thick
- Ceiling opening: 6-7/8"
- Plaster frame: 7-7/8" x 10-3/4"
- Recessed depth: 7-1/2"
- Pryouts: 1/2" and 3/4"
Specifications
P83-ICAT - Energy Star 6" New Construction IC/Air-Tight Compact Fluorescent Housing Features:
- New Construction & Air Tight, IC Energy Star
- Ballast: 120 Volt Electronic
- NPF
- One 4-pin quad or triple 18watt compact fluorescent lamp vertically mounted
- Meets requirements for Energy Star
- Not rated for through branch, but can be "daisy-chained"
- Spans 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P83-AT - 6" Electronic HPF New Construction IC/Air-Tight Compact Flourescent Housing Features:
- New Construction & Air Tight, IC
- Ballast: 120 Volt Electronic
- HPF
- One 4-pin quad or triple 13watt compact fluorescent lamp vertically mounted
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket
- Integral Romex Clamp
- Spans 24" T-bar spacing
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P88-ICAT - 6" New Construction IC/Air-Tight Compact Fluorescent Housing:
- New Construction & Air Tight, IC
- Ballast: 120 Volt Electronic
- NPF
- One 4-pin quad or triple 18watt compact fluorescent lamp vertically mounted
- Not rated for through branch, but can be "daisy-chained"
- Spans 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P821-FB - 6" Incandescent Non-IC Firebox Features:
- Non-IC rated
- UL and CUL Listed for damp location and through branch wiring
- UL Classified to maintain fire ratings of 1 hour or less for UL P200 and P500 series roof/ceiling designs
- UL Classified to maintain fire ratings of 2 hours or less for UL D200, D500, G200, G500, L200 and L500 series floor/ceiling designs
- Acoustically tested to maintain STC Ratings of L500 floor/ceiling assemblies
- IC box accessory available
- Fits into 2 x 10 construction
- 6.875" Ceiling Opening
- 8.1875" Recessed Depth
- 12.325" x 9.5626" Plaster Frame
- 0.5" and 0.75" Pryouts
Specifications
P821-FBFC - 6" Air Tight Incandescent Firebox Features:
- Air-Tight
- Shipped with hardware to install bar hangers to furring channels
- Non-IC rated
- UL and CUL Listed for damp location and feed through wiring
- UL Classified to maintain fire ratings of 1 hour or less for all UL P500 series fire rated ceiling/floor assemblies
- UL Classified to maintain fire ratings of 2 hours or less in all UL D200, G200, L200, D500, G500 and L500 series fire rated ceiling assemblies
- Acoustically tested to maintain STC Ratings of L500 floor/ceiling assemblies
- Insulation must be kept at least 3" away from housing
- Fits into 2 x 10 construction
- 6.875" Ceiling Opening
- 8.1875" Recessed Depth
- 12.325" x 9.5626" Plaster Frame
- 0.5" and 0.75" Pryouts
Specifications
P62-FB - 6" 2-Hour Fluorescent Non-IC Firebox for Recessed Lighting Features:
- Non-IC rated
- Air-tight
- Fits into 2 x 10 construction
- UL classified to maintain up to a two hour fire rating in UL L500 & G531 fire rated ceiling assemblies
- All trims accept 26W or 32W triple tube or spiral 4-pin compact fluorescent lamps unless stated otherwise
- Includes hardware for mounting to furring channels
- Ceiling Opening: 6-7/8"
- Recessed Depth: 8-9/16"
- Plaster Frame: 12-3/8" x 9-9/16"
- Pryouts: 1/2" and 3/4"
Specifications
P183-EB - 6" Remodel IC Compact Fluorescent Housing Features:
- Retrofit version of the P83-AT
- Ballast: 120 Volt Electronic
- HPF
- Exclusive slide mounting bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 0.5" to 1.5" thick
- UL and CUL Listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wires in end of run applications
- One 4-pin quad or triple 13watt compact fluorescent vertically oriented
- 6.625" Ceiling Opening
- 7.5" Recessed Depth
- 0.5" Pryouts
Specifications
P183-26EB - 6" Energy Star Remodel IC Compact Fluorescent Housing Features:
- 120V NPF electronic ballast
- Meets requirements for Energy Star
- Meets California T-24 requirements (requires P8593-01 Kit for Air-Tight)
- Exclusive slide mounting bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 1/2" to 1-1/2" thick
- UL and CUL listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wires in end of run applications
- One 4-Pin Triple or spiral 13w compact fluorescent vertically mounted
- Ceiling opening: 6-5/8"
- Recessed depth: 7-1/2"
- Pryouts: 1/2"
Specifications
Back to top
We Now Ship to Canada!
& check out as you normally would. We take care of the rest!
